FG Warns Parents,Students Against Substandard Schools In Benin Republic
Senior Special Assistant to the President on Foreign Affairs and Diaspora, Abike Dabiri-Erewa, on Thursday, said that the federal government will not revert its stance on blacklisting 52 non-accredited universities in the Benin Republic.
Mrs Dabiri-Erewa disclosed this when Gbemileke Ogunronbi, President, National Association of Nigerian Students, NANS, Benin Republic Chapter paid her a visit in Abuja.
This was contained in a statement by her Media Aide, Abdur-Rahman Balogun obtained by Solacebase.
According to her, the National Universities Commission, NUC, Joint Admission and Matriculation Board, JAMB, and the Ministry of Education had to blacklist some of these schools to save the innocent students.
She, therefore, advised both parents and students to be wary of patronizing sub-standard universities in the neighboring countries.
“Most of these institutions that Nigerian students attend in our neighbouring countries are sub-standard, we have better standard private universities in Nigeria than those schools.
“That is why National Universities Commission (NUC) Joint Admission and Matriculation Board (JAMB) and the Ministry of Education had to blacklist some of these schools to save the innocent students.
“Nigerian students are being exploited in most of these countries, there is a particular country we went to that a university is being run in the portal cabin right inside a market,” she said.
According to her, Nigeria would not accept certificate from such schools for the National Youth Service Scheme (NYSC), because students who failed here run to those schools.
“Don’t waste your money, your resources, your energy going to those schools because they are substandard.
“We need to embark on awareness creation about these schools so that students would not be victims, our children don’t need to go there and they are paying more and getting lesser quality.
“Let us start believing in ourselves towards revamping this country, the economy and using the money judiciously what it is supposed to be used for.
“Unfortunately the issue of bad leadership in the past has affected the standard of education in the country with most of Nigerian students as victims.
“Bad leadership over the years had plunged Nigeria to where we found ourselves today, this is one of the reasons why the youth must support the President in the fight against corruption.
“Those money that are meant to be invested in schools are being stolen by the corrupt leaders. President Buhari is fighting about your future to secure the future.
Solacebase reports that the Senior Special Assistant to the President on Foreign Affairs and Diaspora said things have to be fixed and they are being fixed now, President Buhari is building the foundation now.
884304 842625As soon as I located this internet web site I went on reddit to share some of the really like with them. 625304
869344 432324You designed some decent points there. I looked on the net for any dilemma and located most individuals goes along with together with your site. 253554
235372 925885I like this web site its a master peace ! Glad I detected this on google . 25282
Balanceadora
Aparatos de calibracion: importante para el operacion suave y efectivo de las maquinarias.
En el ambito de la tecnologia contemporanea, donde la rendimiento y la confiabilidad del dispositivo son de alta relevancia, los aparatos de balanceo tienen un papel esencial. Estos dispositivos adaptados estan concebidos para equilibrar y asegurar piezas rotativas, ya sea en herramientas productiva, transportes de traslado o incluso en equipos de uso diario.
Para los especialistas en soporte de aparatos y los especialistas, manejar con dispositivos de calibracion es fundamental para asegurar el funcionamiento uniforme y confiable de cualquier aparato rotativo. Gracias a estas opciones tecnologicas sofisticadas, es posible minimizar notablemente las sacudidas, el zumbido y la presion sobre los sujeciones, extendiendo la vida util de partes costosos.
Igualmente importante es el rol que desempenan los dispositivos de ajuste en la servicio al comprador. El soporte especializado y el soporte continuo empleando estos equipos habilitan dar asistencias de gran nivel, mejorando la bienestar de los usuarios.
Para los propietarios de proyectos, la financiamiento en unidades de balanceo y medidores puede ser fundamental para incrementar la rendimiento y eficiencia de sus dispositivos. Esto es principalmente significativo para los duenos de negocios que gestionan medianas y pequenas emprendimientos, donde cada aspecto vale.
Ademas, los equipos de balanceo tienen una vasta utilizacion en el ambito de la fiabilidad y el monitoreo de calidad. Permiten identificar probables errores, evitando mantenimientos caras y perjuicios a los equipos. Ademas, los datos generados de estos aparatos pueden aplicarse para optimizar procedimientos y aumentar la exposicion en sistemas de exploracion.
Las areas de implementacion de los dispositivos de ajuste cubren numerosas sectores, desde la produccion de ciclos hasta el supervision ambiental. No influye si se refiere de enormes manufacturas manufactureras o pequenos talleres caseros, los dispositivos de balanceo son fundamentales para promover un operacion optimo y libre de interrupciones.
Balanset-1A: Revolutionary Portable Balancer & Vibration Analyzer
Next-generation Dynamic Balancing Solution
Balanset-1A stands as an groundbreaking solution for rotor balancing of rotors in their own bearings, engineered by Estonian company Vibromera OU. The device ensures professional equipment balancing at €1,751, which is substantially less expensive than traditional vibration analyzers while preserving superior measurement accuracy. The system enables in-place balancing directly at the equipment’s operational location without necessitating removal, which is essential for minimizing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company focusing in the creation and manufacturing of devices for technical diagnostics of industrial equipment. The company is incorporated in Estonia (registration number 14317077) and has branches in Portugal.
Contact Information:
Official website: https://vibromera.eu/shop/2/
Technical Specifications
Measuring Parameters
Balanset-1A ensures high-precision measurements using a twin-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The functional frequency range is 5-550 Hz with optional extension to 1000 Hz. The system supports rotation frequency measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Working Principle
The device uses phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two single-axis accelerometers measure mechanical oscillations proportional to acceleration, while a laser tachometer generates impulse signals for calculating RPM and phase angle. Digital signal processing includes FFT analysis for frequency analysis and proprietary algorithms for automatic computation of balancing masses.
Full Kit Package
The standard Balanset-1A delivery includes:
Measurement unit with USB interface – central module with embedded preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (alternatively 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for exact measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation
Operating Capabilities
Vibrometer Mode
Balanset-1A works as a comprehensive vibration analyzer with features for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, determining amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system offers display of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports single-plane (static) and dual-plane (dynamic) balancing with automatic calculation of correction masses and their installation angles. The unique influence coefficient saving function allows substantial acceleration of subsequent balancing of same-type equipment. A dedicated grinding wheel balancing mode uses the three-correction-weight method.
Software
The easy-to-use program interface offers step-by-step guidance through the balancing process, making the device available to personnel without specialized training. Key functions include:
Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)
Fields of Use and Equipment Types
Industrial Equipment
Balanset-1A is successfully used for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In production facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device provides particular value for agriculture, where continuous operation during season is critically important. Balanset-1A is employed for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The possibility to balance on-site without equipment disassembly permits eliminating costly downtime during busy harvest periods.
Specialized Equipment
The device is successfully used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The RPM frequency range from 250 to 90,000 RPM covers virtually all types of industrial equipment.
Benefits Over Competitors
Economic Value
At a price of €1,751, Balanset-1A offers the functionality of devices costing €10,000-25,000. The investment breaks even after preventing just 2-3 bearing failures. Cost reduction on external balancing specialist services amounts to thousands of euros annually.
Ease of Use
Unlike complex vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software enables professional balancing by personnel without specific vibration diagnostics training.
Mobility and Independence
The complete kit weighs only 4 kg, with power supplied through the laptop’s USB port. This permits balancing in outdoor conditions, at isolated sites, and in inaccessible locations without separate power supply.
Universal Application
One device is adequate for balancing the widest spectrum of equipment – from small electric motors to large industrial fans and turbines. Support for single and two-plane balancing covers all standard tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s – a 50-fold improvement. This demonstrates the exceptional accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers successfully balanced radial fans, achieving reduced energy consumption, removed excessive noise, and prolonged equipment lifespan. Energy savings recovered the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an indispensable tool preventing costly breakdowns during peak season. Lower vibration of threshing drums led to lower fuel consumption and bearing wear.
Pricing and Delivery Terms
Current Prices
Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Volume Discounts: up to 15% for orders of 4+ units
Ordering Options
Official Website: vibromera.eu (recommended)
eBay: certified sellers with 100% rating
Industrial Distributors: through B2B channels
Payment and Shipping Terms
Payment Methods: PayPal, credit cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: manufacturer’s warranty
Technical Support: included in price
Summary
Balanset-1A constitutes an perfect solution for organizations aiming to implement an effective equipment balancing system without substantial capital expenditure. The device makes accessible access to professional balancing, permitting small enterprises and service centers to deliver services at the level of large industrial companies.
The blend of accessible price, ease of use, and professional capabilities makes Balanset-1A an indispensable tool for modern technical maintenance. Investment in this device is an investment in equipment reliability, lower operating costs, and improved competitiveness of your company.