Bayero University MCS class of 2021 honours lecturers, Rep member, publisher, others
The 2021 class of Masters in Communication Studies (MCS) of Bayero University, Kano (BUK) on Friday held its dinner and award night.
The event was to celebrate the successful graduation of more than 90 students for the master’s program from the prestigious department of Mass Communication of the university.
Speaking at the occasion, the MCS program coordinator, Dr Usman I. Abubakar said the class is so far the largest since the commencement of the program some seven years ago.
Similarly, a lecturer in the department who served as chairman of the occasion, Dr Abubakar Shehu Minjibir charged the celebrants to be good ambassadors of the school and the university in general.
He said, “This department has achieved a good reputation and has been in existence for the past 43 years.
“I, therefore, implore you to be its good ambassadors in your respective places of jobs and impact positively on the society.
“Education has three main components; knowledge creation, skills acquisition and primary character formation. We hope you will apply all in your lives,” Dr Minjibir added.
Read Also:BUK scraps aptitude test for 2021/2022 session UTME, DE candidates, releases cut-off marks
On his part, the immediate past Vice-chancellor of the National Open University of Nigeria and a lecturer with the department, Professor Abdullah Uba Adamu said in his 41 years of lecturing in the university, he has never seen a students’ graduation reception of this kind.
He added that “I can also tell you that throughout my stay in this university for over four decades, Mass Communication is the most society-networked department in BUK.
“There is always a cordial students-lecturer relationship and even its alumni community. Please try and sustain your networks as life today is all about networking with people.”
The occasion was also graced by more than 10 academic staff from the Faculty of Communication.
Read Also:African Development Bank to support BUK’s entrepreneurship programs
Highlights of the occasion include graduation cake cutting and award presentations to Professor Abdallah Uba Adamu, Professor Umaru Pate, Dr Mainasara Kurfi, Dr Nura Ibrahim, Dr Usman I. Abubakar, Dr Ashir Inuwa, Dr Musa Labaran, Dr Hassan Ya’u, Dr Saminu Umar and Malam Mukhtar Magaji.
Others include the MCS Class Representative, Anas Jazuli Muhammad, the Majority Leader of the House of Representatives, Hon. Alhassan Ado Doguwa, the publisher of Solace Base online newspaper, Abdullateef Abubakar Jos and several members of the class for their various contributions to the success of the program.
719096 164608Greatest fighter toasts ought to entertain and supply prize on your couples. Initially audio system next to obnoxious crowd would be wise to recognize 1 specific gold colored strategy as to public speaking, which is individual interests self. finest man jokes 925663
98575 683731Just a smiling visitor here to share the adore (:, btw outstanding layout. 437252
tadalafil 30mgx30ml liquid dosage tadalafil 10mg vs 20mg chrisale tadalafil 20 mg
what is the difference between tadalafil and viagra how tadalafil works can tadalafil cause blood clots
5mg tadalafil tamsulosin and tadalafil taken together tadalafil 5mg tablets
tadalafil interaction with lisinopril tadalafil 27mg last effect tadalafil female arousal
Conquer epic quests in our immersive online world. Hawkplay
Balanset-1A: Cutting-edge Mobile Balancer & Vibration Analyzer
Modern Dynamic Balancing Solution
Balanset-1A stands as an innovative solution for vibration correction of rotors in their own bearings, created by Estonian company Vibromera OU. The device offers professional equipment balancing at €1,751, which is 3-10 times more affordable than traditional vibration analyzers while maintaining exceptional measurement accuracy. The system allows on-site balancing directly at the equipment’s operational location without necessitating dismantling, which is vital for reducing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company specializing in the creation and production of devices for technical diagnostics of industrial equipment. The company is registered in Estonia (registration number 14317077) and has representatives in Portugal.
Contact Information:
Official website: https://vibromera.eu/shop/2/
Technical Specifications
Detection Parameters
Balanset-1A provides accurate measurements using a two-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The functional frequency range is 5-550 Hz with potential extension to 1000 Hz. The system supports RPM measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Working Principle
The device employs phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two uniaxial accelerometers measure mechanical vibrations proportional to acceleration, while a laser tachometer generates pulse signals for computing rotational speed and phase angle. Digital signal processing includes FFT analysis for frequency analysis and specialized algorithms for automatic computation of corrective masses.
Full Kit Contents
The standard Balanset-1A delivery includes:
Measurement unit with USB interface – central module with embedded preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (alternatively 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for exact measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation
Functional Capabilities
Vibrometer Mode
Balanset-1A works as a full-featured vibration analyzer with features for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, calculating amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system delivers display of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports single-plane (static) and dual-plane (dynamic) balancing with automatic calculation of correction masses and their installation angles. The unique influence coefficient saving function enables considerable acceleration of subsequent balancing of similar equipment. A dedicated grinding wheel balancing mode uses the three-correction-weight method.
Software
The intuitive program interface provides step-by-step guidance through the balancing process, making the device accessible to personnel without specialized training. Key functions include:
Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)
Usage Domains and Equipment Types
Industrial Equipment
Balanset-1A is successfully employed for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In production facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device provides particular value for agriculture, where uninterrupted operation during season is essential. Balanset-1A is used for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The ability to balance on-site without equipment disassembly enables preventing costly downtime during peak harvest periods.
Specialized Equipment
The device is successfully used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The speed frequency range from 250 to 90,000 RPM covers essentially all types of industrial equipment.
Superiority Over Alternatives
Economic Effectiveness
At a price of €1,751, Balanset-1A provides the functionality of devices costing €10,000-25,000. The investment breaks even after preventing just 2-3 bearing failures. Cost reduction on external balancing specialist services reaches thousands of euros annually.
Ease of Use
Unlike complicated vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software enables professional balancing by personnel without specialized vibration diagnostics training.
Mobility and Independence
The complete kit weighs only 4 kg, with power supplied through the laptop’s USB port. This permits balancing in outdoor conditions, at remote sites, and in inaccessible locations without separate power supply.
Universal Application
One device is suitable for balancing the most extensive spectrum of equipment – from small electric motors to large industrial fans and turbines. Support for single and two-plane balancing covers all common tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s – a 50-fold improvement. This demonstrates the remarkable accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers successfully balanced radial fans, achieving lower energy consumption, abolished excessive noise, and increased equipment lifespan. Energy savings offset the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an vital tool preventing costly breakdowns during peak season. Lower vibration of threshing drums led to reduced fuel consumption and bearing wear.
Pricing and Delivery Terms
Current Prices
Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Bulk Discounts: up to 15% for orders of 4+ units
Acquisition Options
Official Website: vibromera.eu (recommended)
eBay: trusted sellers with 100% rating
Industrial Distributors: through B2B channels
Payment and Shipping Terms
Payment Methods: PayPal, credit cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: factory warranty
Technical Support: included in price
Final Assessment
Balanset-1A represents an optimal solution for organizations striving to deploy an efficient equipment balancing system without significant capital expenditure. The device opens up access to professional balancing, allowing small businesses and service centers to deliver services at the level of large industrial companies.
The combination of accessible price, ease of use, and professional capabilities makes Balanset-1A an vital tool for modern technical maintenance. Investment in this device is an investment in equipment dependability, lower operating costs, and increased competitiveness of your company.