The Socio-Economic Rights and Accountability Project (SERAP) has sent a Freedom of Information request to Director-General of the National Youth Service Corps (NYSC) Sule Kazaure, asking him to “urgently provide information on specific details and documents on the Exemption Certificate granted to the Minister of Finance, Mrs. Kemi Adeosun”.
The organisation also asked Brig. Gen Kazaure “to provide information and documents on whether Mrs Adeosun applied for NYSC Exemption Certificate, and if she did, to clarify whether the NYSC actually granted her the Exemption Certificate, the circumstances and the provisions of the NYSC Act under which the Exemption Certificate was granted”.
The organisation said it “needs the information to determine if the crime of forgery has been committed, and if so, to consider possible action in the circumstances, including but not limited to asking the Attorney General of the Federation and Minister of Justice Mr Abubakar Malami SAN to pursue prosecution or in the absence of that, for us to consider the option of a private prosecution”.
Its statement signed by Timothy Adewale, deputy director and released on Thursday reads in part:
“In the FOI request dated 2 August 2018 and signed by SERAP deputy director Timothy Adewale, the organization said, “By providing information and documents on the Exemption Certificate, the NYSC would help put an end to any insinuation of complicity and show that the institution can embrace transparency and accountability in the discharge of its statutory mandates. This would in turn contribute to improved integrity and public image of the NYSC.”
“According to the organisation, “Mrs Adeosun remains innocent until the allegations against her are properly tested and proven beyond a reasonable doubt in a court of competent jurisdiction based on relevant admissible evidence. But the continuing silence by the NYSC management on the matter may create an impression that an offence may have been committed, and lead to accusation that the management has something to hide.”
“The letter read in part: “We urge you and the entire NYSC management and leadership to open-up on the matter and provide information and documents as requested. This will be one step in the right direction. If the information is not provided to us within 7 days of the receipt and/or publication of this letter, the Registered Trustees of SERAP shall take all appropriate legal actions under the Freedom of Information Act to compel you to comply with our request.”
“SERAP is concerned about the perceived lack of transparency and accountability of the NYSC management and leadership in this matter, which has seriously undermined public trust and confidence in the NYSC as a public institution established to serve the public interests.”
“SERAP notes that following allegations of NYSC Exemption Certificate forgery against Mrs Adeosun, the NYSC management issued a statement confirming that she did apply for an Exemption Certificate and promising to ‘investigate the origin of the purported Exemption Certificate in question.’”
“However, we are concerned that the statement lacks specificity as to whether Mrs Adeosun was issued the Exemption Certificate. Further, although the statement was issued on 9 July 2018, the NYSC management has so far failed and/or neglected to publish the outcome of the investigation it promised. Nigerians are also entitled to the right to truth derived from the obligations of the government and its institutions to carry out an investigation into allegations of issues like forgery that have been levelled against Mrs Adeosun.”
“By Section 1 (1) of the Freedom of Information (FOI) Act 2011, SERAP is entitled as of right to request for or gain access to information, including information on the circumstances and the provisions of the NYSC Act under which any NYSC Exemption Certificate was granted to Mrs Adeosun.”
“By Section 4 (a) of the FOI Act when a person makes a request for information from a public official, institution or agency, the public official, institution or urgency to whom the application is directed is under a binding legal obligation to provide the applicant with the information requested for, except as otherwise provided by the Act, within 7 days after the application is received.”
“By Sections 2(3)(d)(V) & (4) of the FOI Act, there is a binding legal duty to ensure that documents containing information relating to the granting of any NYSC Exemption Certificate are widely disseminated and made readily available to members of the public through various means. The information being requested does not come within the purview of the types of information exempted from disclosure by the provisions of the FOI Act. The information requested for bothers on an issue of national interest, public concern, good governance, transparency and accountability.”
The Buhari-led administration is yet to address the forgery allegations against Mrs Adeosun, weeks after PREMIUM TIMES first broke the story on how the finance minister avoided the mandatory one year youth service and thereafter obtained a forged exemption certificate to cover her tracks.
728858 616600The best and clear News is quite significantly imptortant to us. 721147
Balanset-1A: Advanced Portable Balancer & Vibration Analyzer
Industrial-grade Dynamic Balancing Solution
Balanset-1A serves as an advanced solution for vibration correction of rotors in their own bearings, created by Estonian company Vibromera OU. The device offers professional equipment balancing at €1,751, which is substantially less expensive than traditional vibration analyzers while retaining high measurement accuracy. The system allows on-site balancing directly at the equipment’s operational location without requiring dismantling, which is essential for preventing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company focusing in the creation and production of devices for technical diagnostics of industrial equipment. The company is registered in Estonia (registration number 14317077) and has branches in Portugal.
Contact Information:
Official website: https://vibromera.eu/shop/2/
Technical Specifications
Measuring Parameters
Balanset-1A provides high-precision measurements using a dual-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The operating frequency range is 5-550 Hz with possible extension to 1000 Hz. The system supports rotational speed measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Working Principle
The device uses phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two uniaxial accelerometers measure mechanical vibrations proportional to acceleration, while a laser tachometer generates impulse signals for calculating RPM and phase angle. Digital signal processing includes FFT analysis for frequency analysis and proprietary algorithms for automatic calculation of correction masses.
Full Kit Contents
The standard Balanset-1A delivery includes:
Measurement unit with USB interface – primary module with embedded preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (alternatively 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for accurate measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation
Operating Capabilities
Vibrometer Mode
Balanset-1A functions as a complete vibration analyzer with features for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, calculating amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system offers visualization of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports single-plane (static) and two-plane (dynamic) balancing with automatic calculation of corrective masses and their installation angles. The unique influence coefficient saving function allows substantial acceleration of subsequent balancing of identical equipment. A dedicated grinding wheel balancing mode uses the three-correction-weight method.
Software
The easy-to-use program interface provides step-by-step guidance through the balancing process, making the device usable to personnel without specific training. Key functions include:
Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)
Usage Domains and Equipment Types
Industrial Equipment
Balanset-1A is efficiently applied for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In manufacturing facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device represents particular value for agriculture, where uninterrupted operation during season is vital. Balanset-1A is used for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The ability to balance on-site without equipment disassembly enables preventing costly downtime during critical harvest periods.
Specialized Equipment
The device is successfully used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The speed frequency range from 250 to 90,000 RPM covers virtually all types of industrial equipment.
Superiority Over Alternatives
Economic Value
At a price of €1,751, Balanset-1A delivers the functionality of devices costing €10,000-25,000. The investment breaks even after preventing just 2-3 bearing failures. Savings on third-party balancing specialist services totals thousands of euros annually.
Ease of Use
Unlike complex vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software allows professional balancing by personnel without specific vibration diagnostics training.
Mobility and Autonomy
The complete kit weighs only 4 kg, with power supplied through the laptop’s USB port. This permits balancing in outdoor conditions, at distant sites, and in inaccessible locations without separate power supply.
Versatile Application
One device is appropriate for balancing the most extensive spectrum of equipment – from small electric motors to large industrial fans and turbines. Support for one and two-plane balancing covers all typical tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s – a 50-fold improvement. This demonstrates the remarkable accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers successfully balanced radial fans, achieving decreased energy consumption, removed excessive noise, and prolonged equipment lifespan. Energy savings paid for the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an vital tool preventing costly breakdowns during peak season. Decreased vibration of threshing drums led to decreased fuel consumption and bearing wear.
Pricing and Delivery Terms
Current Prices
Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Bulk Discounts: up to 15% for orders of 4+ units
Ordering Options
Official Website: vibromera.eu (recommended)
eBay: certified sellers with 100% rating
Industrial Distributors: through B2B channels
Payment and Shipping Terms
Payment Methods: PayPal, bank cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: factory warranty
Technical Support: included in price
Conclusion
Balanset-1A represents an optimal solution for organizations seeking to implement an efficient equipment balancing system without major capital expenditure. The device makes accessible access to professional balancing, enabling small companies and service centers to deliver services at the level of large industrial companies.
The blend of reasonable price, ease of use, and professional functionality makes Balanset-1A an indispensable tool for modern technical maintenance. Investment in this device is an investment in equipment stability, reduced operating costs, and enhanced competitiveness of your business.